二手矢量网络分析仪 MS4622A 3GHz频谱测试仪[产品打印页面]

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: 二手矢量网络分析仪 MS4622A 3GHz频谱测试仪

产品型号: MS4622A

产品展商: 其它品牌

产品文档: 无相关文档

简单介绍

Anritsu(安立) MS4622A 矢量网络分析仪品牌厂商：Anritsu(安立) Anritsu(安立) MS4622A 矢量网络测量系统软件下载：无 Anritsu(安立) MS4622A 矢量网络测量系统说明书下载：无详细介绍　　Anritsu RF矢量网络测试系统又添新成员--MS462XA和 MS462XB。MS462XX系列代号Scorpion

二手矢量网络分析仪 MS4622A 3GHz频谱测试仪 的详细介绍

Anritsu(安立) MS4622A 矢量网络分析仪

品牌厂商：Anritsu(安立)
Anritsu(安立) MS4622A 矢量网络测量系统软件下载：无
Anritsu(安立) MS4622A 矢量网络测量系统说明书下载：无

详细介绍

　　Anritsu RF矢量网络测试系统又添新成员--MS462XA和 MS462XB。MS462XX系列代号ScorpionTM，与传统的VNAs相比功能更多，能力更强。结合所有的Scorpion新测量选择，包括矢量错误修正噪声指数、内调失真、第三测量接口以及谐波，构成整体测试分解。全新的分解能力将会给使用者带来****的出色动力和快速的测量速度，使制造测试环境大为改观。无需外部控制器，Scorpion的可选AutoCal特点可为使用者提供获得快速、准确和重复校验的能力。

性能
　　·测量速度
　　·动力范围
　　·测试定序/键盘控制
　　·3接口测量
　　·第2内部源使用第3测量接口
　　·通过/未通过测试
　　·标示功能
　　·功率输出范围：传输/反射测试设置 +10 - 85dBm
　　·主体10MHz-3GHz传输/反射

技术指标

Test port char- acter- istics	Standard connector type		N female
	Optional connector types		3.5mm female,3.5mm male,GPC-7,N male
	Mesurement port charact- eristics		Conn-ector	Frequency (MHz)	Dire-ctivity (dB)	Sou- rece match (dB)	Load match (dB)
			3.5mm	10 to 1000^1,2	>46	>44	>46
				1000 to 3000^1,2	>44	>41	>44
				3000 to 6000^1,2	>38	>39	>40
				10 to 1000^1,3	>44	>42	>44
				1000 to 3000^1,3	>42	>40	>42
				3000 to 6000^1,3	>37	>37	>37
				10 to 1000^4	>30	>15	>15
				1000 to 3000^4	>25	>15	>15
				3000 to 6000^4	>20	>15	>15
			N-Type	10 to 1000^1,2	>46	>44	>46
				1000 to 3000^1,2	>44	>41	>44
				3000 to 6000^1,2	>38	>39	>40
				10 to 1000^1,3	>44	>42	>44
				1000 to 3000^1,3	>42	>40	>42
				3000 to 6000^1,3	>37	>37	>37
				10 to 1000^4	>30	>15	>15
				1000 to 3000^4	>25	>15	>15
				3000 to 6000^4	>20	>15	>15
			GPC-7	10 to 1000^1,2	>46	>44	>46
				1000 to 3000^1,2	>44	>41	>44
				3000 to 6000^1,2	>38	>39	>40
				10 to 1000^1,3	>44	>42	>44
				1000 to 3000^1,3	>42	>40	>42
				3000 to 6000^1,3	>37	>37	>37
				10 to 1000^4	>30	>15	>15
				1000 to 3000^4	>25	>15	>15
				3000 to 6000^4	>20	>15	>15
Source specif- ications	Frequency range		MS4622A 10MHz to 3 GHz
	Frequency resolution		1Hz
	Frequency stability (with internal time base) -abomg		<5*10^-6/year
	Temperature		<5*10^-6 voer+15° to 50℃
	Power		MS4622A Transmission/Refleciton Test Set +10 to -85dBm
	Power control range		≥20dB The minimum absolute level for power sweep is-15 dBm while the maximum power output for a unit in+10dBm
	Source power level		The source power(dBm)may be set from thefront panel menu or via GPIB.Port 1 power level is settable form +10dBm(onthe simpler test sets,ranging to +5 dBm on the most complsex)to -15dBm with0.01dB resolution. In addition,the port (& port 3)power may be attenuated in 10 dB stepsusing the internal 70 dB step attenuator.
	Power level accuracy		±dB(no flat power calibration applied;full-bandfrequency sweep at -15 dBm ,0 dBm and maximum rated power)
	Level test port power		The power at all sweep frequencies is leveledto within±1dB.Only port 1 and port 3(if installed)can be externally leveled)
	Harmonics and spurious		<-25dBc at maximum rated power from 10-100MHz,<-30dBc above 100MHz
	Sweep type		Linear,CW,Marker or N-Discrete point sweep
	Power sweep range		20dB(minimum)
	Source #2 (opt- ional)	Freq- uency range	10MHz to 3GHz(6GHz)
		Freq- uency resol- ution	1Hz
		Power level accu- racy	±1dB(no flat power calibration applied full-band frequency sweep at -15dBm 0 dBm & max rated power)
		Harmo- nics and spurios	<-25 dBc at maximum rated power from 10-100MHz,<-30 dBc above 100MHz
		Sweep type	Linear,CW Marker,or N-Discrete point sweep
		Power sweep range	20dB(minimum)
Receiver specs	Average noise level		-100dB in 10Hz IF Bandwidth(<3GHz) Typically>-110dBm in narrowband sweep -90dBm in 10Hz IF Bandwidth(>3GHz) Typically>-100 dBm in narrowband sweep
	Maximum input level		+10dBm
	Damage level		>+27dBm,>+20dBm noise figure mode
Measu- rement speed summary	Measurement times are measured using a singletrace (S21 )display and one average.The measurement speeds for the communicationsband are measured in a 25 MHz band from 824-849MHz ,Hhe typical miasuremi\enttimes displayed are as follows:
	Data points			IF band- width (Hz)	10MHz to 3GHz (ms)	10MHz to 6GHz (ms)	Commun-ication band (ms)
	51			30kHz 10kHz 3kHz 1kHz 300Hz	22 27 38 71 190	25 31 41 75 194	13 18 28 62 181
	101			30kHz 10kHz 3kHz 1kHz 300Hz	32 41 63 130 366	36 45 67 135 371	21 29 51 118 355
	201			30kHz 10kHz 3kHz 1kHz 300Hz	49 68 112 247 717	54 74 118 253 723	37 52 96 231 701
	401			30kHz 10kHz 3kHz 1kHz 300Hz	85 122 212 481 1418	92 130 220 489 1426	69 97 186 456 1393
	801			30kHz 10kHz 3kHz 1kHz 300Hz	154 230 408 947 2819	166 242 420 959 2831	132 190 367 907 2777

订货信息

Mode/Order No.	Name
	Mainframe
MS4622A	10MHz-3GHz transmission/reflection
	Option
Option 2	Time domain
Option 3A	2nd internal source (3 GHz soure)+3rd port
Option 3B	2nd internal source (3 GHz soure)+3rd port
Option4*^1	Noise figure(only for B models)
Option 5	Frequency translaton group delay
Option 6*^2	3rd test port (B models;for use with external synthesizer)
Option 7	T/R step attenuator(only for A models,standard on B)
Option 8	Harmonic measurement
Option 10	AutoCal@ control
Option 11*^3	Test Port connector
Option 13	Intermodulation distortion
	AutoCal@
36581NNF/1	AutoCal@,Type N,10MHz to 6GHz
36581DDF/1	AutoCal@,Type N,10MHz to 6GHz
	Noise sources
NC346A	5dB ENR noise source(3.5mm)
NC346B	15dB ENR noise source (3.5mm)
	Calibration kits
3750LF	SMA/3.5mm RF Cal Kit≤6GHz
3751LF	GPC-7 RF Cal Kit≤6GHz
3753LF	50 Ohm,Type N, RF Call Kit≤6GHz
	Veriticaltion kits
3663LF	Type N verification kit
3666LF	SMA/3.5 mm verification kit
3667LF	GPC-7 verifcation kit
	Accessories
3670N50-1,2	N(f)-N(m) cable,1 foot or 2 foot
3670NN50-1,2	N(m)-N(m)cable,1 foot or 2 foot
3670K50-1,2	K(F)-K(m)cable,1 foot or 2 foot
3670A650-1,2	GPC-7 cable,1 foot or 2 foot

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!